2025 Kona Process CR/DL vs 2026 Norco Fluid A4
The S is the Norco Fluid A4 size closest to your S Kona Process CR/DL. We match frame stack and reach. This is a geometry comparison, not a fit recommendation; stem, spacers, handlebars and saddle setup also affect your riding position.
What changes on the Norco Fluid A4
Compared with the Kona Process CR/DL in S, the Norco Fluid A4 in S places the top of the head tube 12 mm higher and 10 mm further back, relative to the bottom bracket. Its wheelbase is 5 mm shorter, which can contribute to quicker direction changes.
- Frame stack
- +12 mm
- Higher front end
- Frame reach
- −10 mm
- Shorter frame reach
- Wheelbase
- −5 mm
- Shorter: quicker to change direction
- Head angle
- n/a
- One of the bikes has no number for this
- Chainstays
- n/a
- One of the bikes has no number for this
The two frames
Only the Kona Process CR/DL is drawn. The Norco Fluid A4 numbers we have for size S are missing the head angle, seat angle and chainstay length.
Geometry side by side
| Measurement | Kona Process CR/DL S | Norco Fluid A4 S | Difference |
|---|---|---|---|
| Reach | 430 | 420 | −10 mm |
| Stack | 605 | 617 | +12 mm |
| Head tube angle | 65.5 | not listed | |
| Seat tube angle | 76.9 | not listed | |
| Effective top tube | 570 | not listed | |
| Chainstay length | 435 | not listed | |
| Wheelbase | 1171 | 1166 | −5 mm |
| BB drop | 20 | not listed | |
| BB height | 345 | not listed | |
| Standover | 690 | 678 | −12 mm |
| Seat tube length | 380 | 360 | −20 mm |
| Head tube length | 94 | 110 | +16 mm |
Differences are the Norco Fluid A4 minus the Kona Process CR/DL. Full charts: 2025 Kona Process CR/DL, 2026 Norco Fluid A4.
Where each sits in its class
Kona Process CR/DLNorco Fluid A4
Each bike is ranked against the other trail bikes on Quiver, on frame geometry alone. Not your hand position or ride feel.
What each ships with
The stock build of each bike's first listed trim. Parts that match are dimmed.
| Part | Kona Process CR/DL134 CR/DL | Norco Fluid A4A4 |
|---|---|---|
| Frame | Kona Process | not listed |
| Fork | RockShox Pike Ultimate Charger 2.1 RC2 | RockShox Recon Silver |
| Rear shock | RockShox Super Deluxe Ultimate Trunnion | X-Fusion 02 Pro R |
| Shifter | SRAM Pod Controller | Shimano Deore |
| Derailleur | SRAM GX Eagle | Shimano Deore |
| Cassette | SRAM GX Eagle | SunRace CSMS8 |
| Crankset | SRAM GX Eagle Transmission | FSA Comet |
| Bottom bracket | SRAM DUB PF92 | SRAM DUB BB BSA Threaded |
| Wheelset | DT Swiss 350 | Stan's NoTubes Flow D |
| Tire | Maxxis Minion DHF, Maxxis Dissector | Goodyear Newton |
| Brake | SRAM G2 RSC | Tektro HD-535 |
| Rotor | SRAM CenterLine | not listed |
| Handlebar | Kona XC/BC 35 | e*thirteen 800mm 20mm Rise |
| Stem | Kona XC/BC | Norco 6061 Alloy 40mm Length 35mm Clamp |
| Grips | Kona Key | not listed |
| Headset | FSA Orbit 1.5E | Sealed Bearing Tapered |
| Dropper post | RockShox Reverb Stealth | SDG Tellis Dropper |
| Saddle | WTB Volt | Trail |
| Chain | not listed | KMC X11 |
Know what is on every bike.
Add your bike to Quiver. Keep its parts, setup, and service history together, then share your build.
Explore the app
