2025 Kona Process CR/DL vs 2026 Revel Rascal Frame Kit
The L is the Revel Rascal Frame Kit size closest to your L Kona Process CR/DL. We match frame stack and reach. This is a geometry comparison, not a fit recommendation; stem, spacers, handlebars and saddle setup also affect your riding position.
What changes on the Revel Rascal Frame Kit
Compared with the Kona Process CR/DL in L, the Revel Rascal Frame Kit in L places the top of the head tube 3 mm lower and 10 mm further back, relative to the bottom bracket. Its wheelbase is 3 mm shorter, which can contribute to quicker direction changes.
- Frame stack
- −3 mm
- Lower front end
- Frame reach
- −10 mm
- Shorter frame reach
- Wheelbase
- −3 mm
- Shorter: quicker to change direction
- Head angle
- −0.7°
- Slacker: calmer steering
- Chainstays
- +1 mm
- About the same
The two frames
Only the Kona Process CR/DL is drawn. The Revel Rascal Frame Kit numbers we have for size L are missing the seat angle.
Geometry side by side
| Measurement | Kona Process CR/DL L | Revel Rascal Frame Kit L | Difference |
|---|---|---|---|
| Reach | 480 | 470mm | −10 mm |
| Stack | 625 | 622mm | −3 mm |
| Head tube angle | 65.5 | 64.8° | −0.7° |
| Seat tube angle | 76.7 | not listed | |
| Effective top tube | 628 | 627mm | −1 mm |
| Chainstay length | 435 | 436mm | +1 mm |
| Wheelbase | 1230 | 1227mm | −3 mm |
| BB drop | 30 | 31.2mm | +1 mm |
| BB height | 345 | 348mm | +3 mm |
| Standover | 710 | 730mm | +20 mm |
| Seat tube length | 420 | 445mm | +25 mm |
| Head tube length | 105 | 104mm | −1 mm |
| Fork length | not listed | 566mm |
Differences are the Revel Rascal Frame Kit minus the Kona Process CR/DL. Full charts: 2025 Kona Process CR/DL, 2026 Revel Rascal Frame Kit.
Where each sits in its class
Kona Process CR/DLRevel Rascal Frame Kit
Each bike is ranked against the other trail bikes on Quiver, on frame geometry alone. Not your hand position or ride feel.
What each ships with
The stock build of each bike's first listed trim. Parts that match are dimmed.
| Part | Kona Process CR/DL134 CR/DL | Revel Rascal Frame KitFrame Kit |
|---|---|---|
| Frame | Kona Process | Revel Rascal |
| Fork | RockShox Pike Ultimate Charger 2.1 RC2 | not listed |
| Rear shock | RockShox Super Deluxe Ultimate Trunnion | RockShox SDLX Ultimate |
| Shifter | SRAM Pod Controller | not listed |
| Derailleur | SRAM GX Eagle | not listed |
| Cassette | SRAM GX Eagle | not listed |
| Crankset | SRAM GX Eagle Transmission | not listed |
| Bottom bracket | SRAM DUB PF92 | not listed |
| Wheelset | DT Swiss 350 | not listed |
| Tire | Maxxis Minion DHF, Maxxis Dissector | not listed |
| Brake | SRAM G2 RSC | not listed |
| Rotor | SRAM CenterLine | not listed |
| Handlebar | Kona XC/BC 35 | not listed |
| Stem | Kona XC/BC | not listed |
| Grips | Kona Key | not listed |
| Headset | FSA Orbit 1.5E | Cane Creek 40 Series |
| Dropper post | RockShox Reverb Stealth | not listed |
| Saddle | WTB Volt | not listed |
Know what is on every bike.
Add your bike to Quiver. Keep its parts, setup, and service history together, then share your build.
Explore the app
